Printer not detected screen appears during installation in Hp Printer
1. Verify that the printer is turned on.
2. Verify that you have an active network connection.
Look at the light on the network connector on the back of the part. If the light is on, The printer is connected to a wired network. If the light is off, check the cable Connections from the printer to the gateway, router, or hub to make sure connections are secure.
Verify that the printer is connected to the network with the cable that is the package with the printer.
If the connections are secure, recycle the power on your printer.
3. Print a configuration page. To print a configuration page, when the printer is in the Ready state, press and hold the GO button until the Ready light starts blinking. For more information, see Configuration page.
4. Verify that the printer’s internal networking component is set to its factory default settings. If the print server was before configured, it might need to be reset to the factory default settings.
Communication mode: ad-hoc (peer-to-peer)
Network name (SSID): hp setup
Encryption: disabled
You can check the print server's configuration by printing a configuration page. To reset the printer to the factory settings, when the printer is turned off, press and hold the GO and CANCEL buttons. Turn on the printer, and continue to hold the GO and CANCEL buttons until all lights are blinking in unison.
5. Move the printer and the computer closer together. If the distance between your computer and the printer is important, try reducing the distance. If possible, give a clear path between the computer and print server, and minimize sources of radio intrusion. For more information
For more info:
| HP printer tech support phone number Helpline number: +1800-787-2406 |
0 comments: